top of page

Remote learning support

Public·34 membres
Zinovy Khokhlov
Zinovy Khokhlov

Macbook Pro Drivers Windows 10

Boot Camp requires a Mac with an Intel processor. When you install Microsoft Windows on your Mac, Boot Camp Assistant automatically opens the Boot Camp installer, which installs the latest Windows support software (drivers). If that doesn't happen, or you experience any of the following issues while using Windows on your Mac, follow the steps in this article.

Macbook Pro Drivers Windows 10

However, after running Windows Update, it still lacks drivers for WiFi, audio, the touchpad, and a few other devices. I can't seem to find those drivers available for download from any official sources. And all the info I can find about it assumes that I left the BootCamp partition intact (which I did not).

Open Apple Software Update for Windows and install available updates to get all the drivers. You will find additional details on the Mac models that support Windows 10 on the following link. You can check your computer model by selecting the Apple menu and choosing About This Mac when you are booted into OS X.

On my MacBook Pro (8,1 early 2011, MacOS 10.13) I first installed Win 7 via BootCamp and Win 7 install DVD. In Win 7 I installed the Win 7 drivers supplied by BootCamp. Then I downloaded MediaCretionTool from MS and with it I installed Win 10 over Win 7. After booting Win 10 Hardware Manager showed a few missing drivers. From -desktops/macbookpro8%2C1/1927 I downloaded and installed the following missing drivers:

Boot Camp requires a Mac with an Intel processor. When you install Microsoft Windows on your Mac, Boot Camp Assistant automatically opens the Boot Camp installer, which installs the latest Windows support software (drivers). If that doesn't happen or you experience any of the following issues while using Windows on your Mac, follow the steps in this article.

I understand your concern about Bootcamp drivers. If you download install the wrong versions of stuff, that will nowhere going to help you. If you don't know which driver you need to install, it's better to take help of a good driver updater tool such as FixBit

If you are unable to download Boot Camp drivers on your Mac computer for some reason or want to download Boot Camp on a Windows PC, you can use a third-party tool. Such tool automatically finds the suitable driver for your Mac or Windows OS. You need not take the burden of "is it the right driver or not?"

See Download and install Windows support software on your Mac - Apple Support for reference. The BCA Action menu uses your Mac's Model Identifier to give you the correct drivers for the Apple-specific drivers that you need. IN the past, with downloadable drivers, many attempts have been made to install incompatible drivers on the incorrect Windows versions. For example, many MacPro users use BC5.x driver on W10, even though they are not certified. Apple Software Update on Windows provides any updates to the base BC drivers package obtained from the Action Menu.

The BC5.x drivers are still downloadable from Install Windows 7 on your Mac using Boot Camp - Apple Support, which support W7/W8.1. BC5.x drivers do not support releases older than W7, which would require BC4 or BC3 drivers.

If apple is worried about users installing the wrong drivers, I'd respond from the world of Windows by saying "we call that Tuesday". Well actually installers are pretty good at detecting devices and doing things right nowadays without the help of using a model identifier, but I get it. Apple's going to limit the options for users to mess things up.

So I can't really find any documentation about what the latest version of the software is but I heard they've only incremented to 6.1. But I can't be sure because I'm stuck with whatever the BCA gave me. When I poke around on the BCA stick, the drivers are dated 2016.

On the internet I've seen news about 6.1 being released in Spring 2016, and Wikipedia says there was the latest version released in September 2017 and that's all the info I have. I'd say it's probable that the files on my memory stick are from 6.1 given their date stamp. (BTW I'm on a mid 2014 13" macbook pro).

It looks like I'm going to have to find some hack to get the new drivers to install, or risk uninstalling everything I currently have for boot camp so I can get the installer to install, and cross my fingers that I can run my system in-between boot camp installations.

source: . The page was aimed at people struggling with BootCamp, but either way, it gets you to the BootCamp.pkg file, which contains the drivers.

You still need open the OS X installer pkg file to get the the contents out, and to open a DMG file. If you are already in Windows, 7-zip will open it:

P.S. Perhaps I'm a bit of a 'paranoid ready-for-the-end-of-the-world' type, but anyway you look at it (or me) - I wouldn't recommend trusting third party downloads of drivers, unless you have the inside scoop on what goes into making them (which you don't). Why?

This 'Apple DL1443: Boot Camp Software Update 3.3 for Windows' is definitely the required Update. I have a 2010 Macbook Pro with Snow Leopard (10.6.8) installed and couldn't get the right Boot Camp upgrade using any of the Apple download software from within the bootcamp Application.After installing this Update/Upgrade suddenly all of the required drivers appeared in the Windows 'Device manager' and everything started working perfectly

If you own a Mac and you wanted to install Windows on it to run maybe some Windows software or games, Apple makes it possible by releasing Windows drivers which will allow Windows to run on your Mac computer.

Greetings. I am in the process of trying to get windows 7 onto my MacBPro, running 10.9.4. I have purchased Windows 7, downloaded it & have an .iso file.I followed the instructions in bootcamp(gotten all proper windows updates) and utilized your bit of code to get bootcamp to create a bootable disc from the iso file and put it on a USB, which it does successfully. When I proceed to partition my drive through bootcamp, it stops me & says there is no bootable disc detected, pls install disc.Through my research I have also installed rEFIt and using disk utility partitioned my drive and bypass bootcamp. When I start my mac, I get the rEFIt option to install windows from my USB, but in doing so it cannot find the BOOTMGR file.Any assistance would be greatly appreciatedIra

I have Installed WIndows 8.1 using your method..But when i install Bootcamp Drivers..It installs them for a while and then screen goes black (when it is installing graphic drivers) and nothing happens eventually i have to restart my mac and then after the windows logo again that black screen appears..!Any Suggestions ?

Hi. I already downloaded windows 8.1 (64-bit). And was in the process of making a bootable usb with the boot camp assistant but it prompts me with this message: Boot Camp only supports 64-bit Windows installation on this platform. Please use a ISO file for 64-bit Windows installation. I have a Macbook Air 10.9.2-early 2014. Please help. thanks

Hi Eric,Yes it is free and you should be able to get all the boot camp drivers here.Boot camp driversAlso the last part of this video should give you some idea how to install them.How to remove a bootcamp partition and install Windows support software from Apple.CheersMatt

ok awesome! I watched the video but when it asks where you want to save the installation file you chose USB. Do i choose USB as well to transfer to my iMac? Because I can only install windows with an ISO file but my iMac does not have a DVD drive. and when you enter the product key while on PC, will it start to download windows to that PC?

Got it to work, but one problem! On my PC when I went to this website and clicked create media installation, I chose ISO file and saved that ISO to my flashdrive, which I then plugged into my iMac so I could use that ISO in Bootcamp. Everything installed except the bootcamp drivers never came up during the installation so I cant connect to the internet while in windows 8.1. Was I not supposed to create an ISO file?

Amigo sou Brasileiro, e queria sua atenção. Pelo Boot Camp não consegui de jeito nem um estalar o windows 8.1 pois optei em particionar meu HD com 20 GB no formato do windows e dar o Boot na maquina direto pelo pendrive, estalei tranquila mente o windows, mas fiquei sem som e sem internet, tem algum jeito de baixar esses drives pelo Mac e passar parra o pendrive depois escutar no windows ? Ou seja agora estou com windows e o OS X como opção de boot mas o windows não funciona som nem internet.

Hi, i want to askMy Mac is 21.5 inch Mid 2010 and the Bootcamp drivers in your site is Windows 7, but i want to install Windows 8.1. Is it possible to install Windows 8.1 if my drivers is Windows 7 ?thx

I have a couple of questions. If I back up my data with an external hard drive, can I use only one external hard drive for both Yosemite and Windows 8?And if I decide to remove the boot camp partition and reinstall it, will I be allowed to use the same product key for windows 8 as I did the first time?

Hi Yohan,See my reply to Davey.Hi Davey For the time being see if you can use a USB mouse and keyboard. The thing to check would be the device manager and see what drivers are missing. Then use the boot camp downloads to see if the devices will disappear. Try using an older version than 5.1.5640. Cheers Matt

Greeting sir ..I was try to install windows 8.1 with assistant bootcampI used 8 gb usb and finish ..But , when i collecting information ( step 1 )I seeDrive 0 partion 1Drive 0 partion 2Drive 0 partion 3And no bootcamp there ..Please help me ..

would you help me please i have macbook air 11 inch late 2010 i try to install window 7 when open boot camp and continue i got two options1 download the latest windows supp,2 install window 7than continue window pop up, The installer dis could not be found.all ready i have window 7 ISO and also window support software from Apple in USB on my mac desktop 350c69d7ab

À propos

Welcome to the group! You can connect with other members, ge...


bottom of page